Sleeping system Van Spacetourer / Pössl Vanster / Traveller / E-Ulysse / Proace Verso / Zafira Life
VARIABLE SLEEPING SYSTEM FOR DIFFERENT SEAT VARIANTS - VANESSA VAN FOR PSA VEHICLE MODELS WITH RAIL SYSTEM
available immediately on collection (by appointment)
Our sleeping system Van can be set up in just a few steps and very flexible seat combinations:
Your van remains an everyday vehicle that can be converted into a motorhome as required.
Vehicle length: XS, S, L1, compact (4.6 m) / M, L1, L2 (4.9 m) / L, XL, L2, L3 (5.3 m)
Additional support leg: if the bed is to be set up in combination with 2 seats (2-seater bench), an additional support leg is required instead of the single seat.
Please note:
short vehicle length: bed can only be set up without seats or only with the front bench, the rear bench must be removed
medium vehicle length: bed can be assembled with all seats (without seats, with rear bench, with front bench, with both rows of seats). However, only the front row of seats can be used.
long vehicle length: bed can be set up with all seating situations (without seats, with rear bench, with front bench, with both rows of seats).
Picture upload:
When ordering, please send us a picture of the open rear of your vehicle so that we can see the rails on the floor (upload function or by e-mail).
For vehicles without rail system:
For the time being an individual fastening is necessary; therefore currently only pick-up at the factory possible!
Pössl Vanster with original Pössl Vanster kitchen module:
Mattress is cut to size on the driver's side due to the larger cut-out at the factory. Please take into account that the cover sits a little looser at this point as a result.
For vehicles with rail system from year of construction 2022:
Due to drastic changes to the rail system by the vehicle manufacturer, this sleeping system can only be used with one row of seats maximum.
VanEssa care and cleaning instructions "furniture"
VanEssa product and care info "mattress"
bed size/dimensions mattress
COMFORT Mattress,4 pcs, approx. width 135/120 cm, length 188 cm, height 10 cm
packing dimensions (expanded)
Sleeping System (without mattress) approx. width 126 cm, length 74 cm, height 12 cm
Mattress approx. width 135 cm, length 47 cm, height 40 cm
Weight
46 kg (34 kg +mattress 12 kg)
Load capacity approx.250 kg
Scope of supply
Our sleeping system Van can be set up in just a few steps and very flexible seat combinations:
- without rear seats
- with two or four individual seats
- and/or with one bench seat folded down
- both rear seat rows possible with a long wheelbase
Your van remains an everyday vehicle that can be converted into a motorhome as required.
Overview and advantages
- comfortable bed area as a double bed
- high-quality, comfortable VanEssa COMFORT sleeping surface
- lots of storage space
- load-through option
- very easy to assemble and disassemble
- Optimal subdivision in the luggage compartment due to the rear board
- Sleeping board and mattress can be stored on the rear board while driving to save space
- Addition of our rear kitchen is possible at any time
Assembly
- Attach the rear board to the rail system in the boot of the vehicle.
- Attach the sleeping board to the rear board or the middle sleeping board, stabilise it on the folding supports or place it on the folded seats in the front passenger compartment (on one or two folding supports, depending on the seating situation).
- Spread out the sleeping surface - done!
Variants:
Vehicle length: XS, S, L1, compact (4.6 m) / M, L1, L2 (4.9 m) / L, XL, L2, L3 (5.3 m)
Additional support leg: if the bed is to be set up in combination with 2 seats (2-seater bench), an additional support leg is required instead of the single seat.
Please note:
short vehicle length: bed can only be set up without seats or only with the front bench, the rear bench must be removed
medium vehicle length: bed can be assembled with all seats (without seats, with rear bench, with front bench, with both rows of seats). However, only the front row of seats can be used.
long vehicle length: bed can be set up with all seating situations (without seats, with rear bench, with front bench, with both rows of seats).
Picture upload:
When ordering, please send us a picture of the open rear of your vehicle so that we can see the rails on the floor (upload function or by e-mail).
For vehicles without rail system:
For the time being an individual fastening is necessary; therefore currently only pick-up at the factory possible!
Pössl Vanster with original Pössl Vanster kitchen module:
Mattress is cut to size on the driver's side due to the larger cut-out at the factory. Please take into account that the cover sits a little looser at this point as a result.
For vehicles with rail system from year of construction 2022:
Due to drastic changes to the rail system by the vehicle manufacturer, this sleeping system can only be used with one row of seats maximum.
Details
Material: poplar plywood with CPL coating (silver) VanEssa care and cleaning instructions "furniture" VanEssa product and care info "mattress"bed size/dimensions mattress
COMFORT Mattress,4 pcs, approx. width 135/120 cm, length 188 cm, height 10 cm
packing dimensions (expanded)
Sleeping System (without mattress) approx. width 126 cm, length 74 cm, height 12 cm
Mattress approx. width 135 cm, length 47 cm, height 40 cm
Weight
46 kg (34 kg +mattress 12 kg)
Load capacity approx.250 kg
Scope of supply
- foldable rear board (clear height under rear board 50,5 cm)
- sleeping board middle
- sleeping board front
- 2 folding brackets
- as required: supporting bracket if sleeping system is used in combination with 2-seated bench (choose in dropdown)
- 4-part COMFORT mattress: width 120-135 cm (narrowed in the back due to car lining), length 189 cm, height 10 cm
- all mounting parts included in delivery
Video
